![background image](http://html1.mh-extra.com/html/ayra/ero-laser/ero-laser_user-manual_3042293002.webp)
Safety precautions
WARNING:
This unit may cause serious injury to eyesight when used incorrect. It therefore is strongly
advised to read this user manual carefully, to get familiar with the functions of this laser device.
WARNING:
This unit must be operated by, or under the supervision of an adult. This device is not suitable
for children.
WARNING:
Do not look directly into the beam coming out of the lens, from short distance or when a solid
beam is projected. This may cause serious injury to eyesight. Ayra is not responsible for any injuries caused
by incorrect use of this device.
WARNING:
Do not project the beam of this unit on to reflective surfaces, as the shattering beam may cause
injury to eyesight.
Installation requirements:
- Always check the voltage settings on the unit and the power supply you want to connect the device to. If the
voltage requirements do not meet, do not connect the device as this may cause serious damage.
- This device must be installed by a professional technician, in a standing or hanging position. Always pay
attention to the positioning of the unit, as the beams may project directly into your audience.
- It is strongly advised to
NOT
project the beams directly into your audience. Ayra strongly recommends a
minimum distance of 1.5 meters in height between the lowest projected laser beam and your audience, for
optimal safety. If there is no other option, keep a minimum distance of 5 meters from the beam exit to the first
beam that hits your audience.
- When installed in a standing position, a safety cable is recommended to secure the unit.
- When installed in a hanging position, this unit
MUST
be secured by using a safety cable, capable of holding
10x the weight of this device.
- When installed in a hanging position, this unit must be mounted to a proper surface, e.g. a truss system.
When using a truss system, Ayra recommends the use of a proper hook or halfcoupler.
- Make sure there are no flammable objects in the direct environment of the device (such as decorative
objects). Keep a minimum distance of 1.5 meter.
- Do not block the beam-exit and fan
- Keep a minimum distance of 0.5 meter from any walls to provide sufficient cooling
- Make sure the beam-exit and fan are not blocked by any objects in the near environment
- This unit must be connected to a grounded power supply that meets the voltage requirements of the device.
Maintenance and protection
- Keep the unit away from dusty environments, as this may have negative effect on the fan-cooling system
and laser optics. Ayra recommends using a flightcase for storage of this device. Clean the optics and fan of
the laser with a small, soft brush and vacuum cleaner when needed. Clean the housing of the unit with a
damp cloth.
WARNING:
Always disconnect the unit from the power supply when cleaning the unit.
Reconnect the unit only if any moist on the fixture disappeared completely.
- This laser device is a lighting effect, designed to support visual entertainment while playing music.
Continuous use is not recommended. Do not use the device longer than 3 hours subsequently, so the unit
can cool down. This will provide a longer lifespan for the diodes. Apply a cooling-down time of 25 minutes
before re-activating the laser.
- Do not switch the power on and off too often, as this may cause serious damage to the unit.
- Avoid heavy shocks and collision during transport and use, as this might cause damage to the laser diodes,
electronic circuit, optics and housing.
- Keep the device away from moisture, rain, water or any liquids as this may cause a short circuit and/or
electric shocks. If any liquid enters the unit, power supply or housing of the unit, disconnect the unit
immediately and do not reconnect the power supply. Contact your local dealer or technician to inspect the
unit for any damage.