Ayra ERO 3108, Руководство пользователя

Страница: 5 / 10

5
Setting up the unit
To activate the unit, connect the included power supply to the unit and a suitable 230V, 50 Hz power
outlet.
Switch the on/off switch to the ‘ON’ position, the LED movinghead will activate.
Give the movinghead time to calibrate the stepping motors, which are used to determine the position
of the head. You may hear and see some shaking, which is normal. The stepping motors use an end
point to determine the beginning and end of their movement. After calibration, the movinghead will
start the previously used mode, but by default it is set to DMX mode.
The display shows several settings, each with the possibility to set several values. In the table below is
an explanation for every feature and value.
Menu item Description Values/options
‘Enter’ triggers
action
Followed by
DMX ADDRE Press enter and
use up/down to
change the DMX
address 1
– 512
Set DMX address Press Menu to
return to the main
menu
PAN INVERT Press enter and
use up/down to
change the pan
inversion Yes / no
When ‘yes’ is
selected, the
behavior of the
pan function will
be inverted
Press Menu to
return to the main
menu
PAN ANGLE Press enter and
use up/down to
change the pan
angle 540 / 630 Choose between
a pan angle of
maximum 540 or
630 degrees Press Menu to
return to the main
menu
TILT INVERT Press enter and
use up/down to
change
the tilt
inversion
Yes / no
When ‘yes’ is
selected, the
behavior of the tilt
function will be
inverted
Press Menu to
return to the main
menu
MODE Use the up/down
buttons and enter
to
choose a
working mode
DMX 512
SLAVE
AUTO
SOUND
Scroll and press
enter to select an
operating mode Press Menu to
return to the main
menu
MANUAL Press enter to
access the
manual operating
mode
CH:XX
Date(XXX) Select a channel
(CH:XX) and a
value
for the
channel
(Date(XXX)).
Press Enter to
save the setting.
RESTORE Press enter to
access the Motor
and Factory reset
Motor reset =
recalibrate the
pan and tilt
motors
Factory reset =
Reset the fixture
to factory settings
Press enter to
activate the reset
function for the
motors or factory
reset.
The display will automatically shut down after 30 seconds of inactivity. When pressing one of the menu
buttons, the menu backlight will re-activate.