![background image](http://html1.mh-extra.com/html/ayra/alo-060/alo-060_user-manual_3042291006.webp)
Setting up the unit
To activate the unit, connect the included power supply to the unit and a suitable 230V, 50 Hz power outlet.
The fixture will start up and show the last chosen setting on the display. Usually, with a new product, this is
the DMX mode with the value set on 001.
The display shows several settings, each with the possibility to set several values.
Use the display and the menu buttons on the bottom to set preferences, change settings and scroll through
the menu. “Enter” is used to save a certain setting or preset, press “Menu” for at least 2 seconds to discard
the change and return to the main menu.
The table below shows an explanation for every feature and value.
display
Mode
Function
ADDR
DMX address setting
A001-A512
CHND
Channel mode
8CH mode/11CH mode
SLND
Master/slave mode
Master (default)
Slave 1 - Slave 2
SPLC
Split color mode
YES-NO
SOUN
Sound controlled mode
Sound controlled mode on/off
SENS
Sound sensitivity
Sound sensitivity 0-100
BLND
Advanced Blackout Control
No: Normal operation
Yes: No light during movement
LED
LED mode
ON-OFF
DISP
Display inversion
Display Inversion, Idsp-dspI
PAn
Pan inversion
YES-NO
TILT
Tilt inversion
YES-NO
TEST
Test mode
Self test
TEMP
Temperature
0 ~ 9999
Hour
Using time of light
Fixture hours,0 ~ 9999
RSEt
Reset
reset
ADDR:
DMX address setting, used to determine the DMX starting channel. From this channel on, the fixture
will respond to values, corresponding with the amount of channels that the fixture is occupying. (For
example, when you set the starting address to value 003, the fixture will respond to channels 3, 4, 5 etc.)
CHND:
The channel mode of the fixture makes it possible to use the correct channel mode setting for every
application. For simple and basic setups, users may prefer to use the 8CH mode. For advanced setup, users
may prefer to choose the 11CH mode.
SLND:
When using the master/slave function, you need to connect 2 or more fixtures with XLR-XLR cable.
The first fixture in line needs to be set as master, the others as Slave 1 or 2 (synchronized or mirrored
performance). This way, the slaves will mimic the behavior of the master fixture for wonderful synchronized
lighting shows.
SPLC:
Split Color mode: The split color mode makes it possible to stop the color wheel between two colors,
SOUN:
Activate or disable the built-in sound controlled mode. This way, the fixture will respond to the beat of
the music.
SENS:
The sensitivity of the built-in microphone is adjustable, to optimize the built-in sound controlled mode.
For example, when your music source (speakers) are placed far away, you might want to increase the
sensitivity to make sure that the fixture responds to the sound accurately.
Содержание ALO 060
Страница 1: ...ALO 060 DMX LED scanner User manual...