background image

Safety instructions

This unit must be operated by, or under the supervision of an adult. This device is not suitable for children. 

Every person involved with the installation, operation and maintenance of this device has to:
- Be qualified
- Follow the instructions of this manual

- Make sure there is no damage caused by transport. If the device seems damaged from the outside, do not 
use it and contact your dealer for more information.
- To make sure the device remains in perfect condition and for safe operation, the user must follow the 
instructions and warning notes of this user manual.
- Damage caused by improper use or modifications to the device are not covered by the warranty.
- This device does not have any user-serviceable parts inside. This device must be serviced by qualified 
technicians.
- The light source of this device is not replaceable. When the light source reaches its end of life, the whole 
luminaire must be replaced.

Important notes regarding safety and health:

- Never let the power cord come in contact with other cables. Handle the power cord and all mains 
connectors with caution.
- Never remove any warning or informative labels from the unit.
- The ground contact must be connected at all times. Do not cover or remove the ground contact.
- Never leave cables lying around.
- Do not open the device and do not modify any hardware or software.
- Do not insert objects into air vents of this device.
- Do not connect this device to a dimmer pack.
- Do not switch the system on and off frequently, as this will reduce the lifespan of the device.
- Do not drive the inputs of the fixture with a signal greater than required to work at full performance.

All information and illustrations shown in this user manual are subject to change without further notice.

User manual version: 1.0

Creation date + author initials: 13-05-2015 RV Revision date + author initials: 

WARNING!

Always keep this device away from moisture and rain! Hazardous electric shocks may occur!

WARNING!

Only connect this device to a matching power outlet. This device is intended to work on a 
specific AC current. Connecting this device to power outlets with other voltages may result in 
permanent damage and possible hazardous situations, such as fire or electric shocks!

WARNING!

Be careful with every operation of this device. Touching live wires inside and outside the unit 
may cause hazardous electric shocks!

Содержание 9000-0019-1963


















Отзывы: