When the battery is connected and inserted properly, the lid can be placed back and tightened with the
supplied screws.
NOTE:
Please remove the battery when the unit will not be used for a longer period of time.
ON/OFF switch and Power LED
Please note that this device is equipped with an on/off switch. When the unit is activated, the Power LED
indicator on top of the unit will light up.
DMX output
This device uses a female 3-pin XLR connector for the distribution of the DMX signal. Please note that a
small group of devices might not work proplerly with this device or might have a different connector.
1. Martin protocol: Old lighting effects from the brand Martin might use a different control protocol, where the
data pins of the controller might be inverted. This can be solved by making an adapter cable which switches
the data pins.
2. 5-pin DMX devices: Some modern, high-class intelligent DMX lighting devices might work with 5-pin XLR
connectors. Adapter cables from 3-pin to 5-pin connectors can be purchased at your local dealer/selling
point.
Mounting brackets
The unit is equipped with mounting brackets, which makes proper installation in a desk, wall or shelf
possible. Please measure carefully and pay attention to the position of the connectors when installing this
product in such an environment. Use plastic rings to prevent scratches on the unit from screws and/or bolts.
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0
Creation date + author initials: 29-03-2014 RV Revision date + author initials: 29-03-2014 RV
