34.
35.
36.
37.
38.
39.
DESCRIPTION OF THE SYMBOLS
Before any use, refer to the corresponding section in this user manual.
In accordance with European directives applicable to this product.
WARNING: In order to avoid overheating, do not cover the heater.
Caution, hot surface.
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from
household waste. The item should be handed in for recycling in accordance with local environmental
regulations for waste disposal. By separating a marked item from household waste, you will help
reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative
impact on human health and the environment.
GENERAL SAFETY INFORMATION:
Please read all instructions carefully before using. This product is
not a toy. It should not be used by children or infirm persons with-
out supervision.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental capa-
bilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance shall not
be made by children without supervision.
Children of less than 3 years should be kept away unless continu-
ously supervised.
Children aged from 3 years and less than 8 years shall only switch
on/off the appliance provided that it has been placed or installed
in its intended normal operating position and they have been
given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved. Children aged
from 3 years and less than 8 years shall not plug in, regulate and
clean the appliance or perform user maintenance.
CAUTION — Some parts of this product can become very hot
and cause burns. Particular attention has to be given where
children and vulnerable people are present.
Do not use this heater with a programmer, timer, separate
remote-control system or any other device that switches the
heater on automatically, since a fire risk exist if the heater is cov-
ered or positioned incorrectly.
Disconnect from mains when not in use or cleaning.
Do not operate the appliance with a damaged cord or plug. If the
supply cord is damaged, it must be replaced by the manufacturer
or its service agent or a similarly qualified person in order to avoid
a hazard.
It is not recommended to use an extension cord.
When the heater is turned on for the first time, it may release a
slight, harmless odor. This odor is a normal occurrence caused by
the initial heating of the internal heating elements and should not
occur again.
Please do not put any unit on the product.
In order to avoid any accident, please turn off the unit when
people leave.
Please do not use the product when there are no people to take
care of children, animal or the disabled people.
If do not use the product for a long time, please disconnect the
plug, put the product into the box and stock the product in a dry
and ventilated place.
When using the product, please do not locate the air outlet and
inlet next to the wall or curtain to avoid obstructing the air and
influence the effect.
Please do not use the product under the direct sunshine.
The inflammable or explosive article is not allowed to be put
around the heater. The product is not allowed to be use in the
environment filled with inflammable air or dust.
Please do not let the power cord touching the front net cover in
order to avoid the high temperature damaging the power cord.
Do not hang the wet clothes above the heater.
The voltage and frequency of the power supply must comply with
the technical specification of the heater.
Not allowed to impinge or shake the unit when it is in operation
。
Please keep wind inlet & outlet unblocked, to avoid any malfunc-
tion appearance, such as distortion, changing color, etc.
Do not let the power cord at the wind outlet, it will damage the
The heater is hot when in use .To avoid burns, do not let bare skin
touch hot surface.
Do not immerse cord, plug or any part of the appliance in water or
any other liquid.
Do not use the heater in dusty environments or where flammable
vapours are present (e.g. in a workshop or garage).
Do not place the heater on or near any other source of heat.
Warning: in order to avoid overheating, do not cover the
heater.
A fire may occur if the heater is covered with or touches flam-
mable material, including curtains, drapes, bedding etc. when in
operation. KEEP THE HEATER FROM SUCH MATERIALS.
The heater must not be located immediately below a socket-
outlet.
Do not use this heater in the immediate surroundings of a bath, a
shower or a swimming pool.
Do not let the mains lead hang over the edge of the table or work
surface or touch hot surfaces.
Do not use outdoors.
Do not use the appliance for other than its intended use. This
appliance is intended for household use only.
Do not misuse the cord or pull the cable to disconnect it from the
outlet. Instead, grasp the plug and pull it to disconnect.
Do not attempt to repair, disassemble or modify the appliance.
There are no user-serviceable parts inside.
Do not insert or allow foreign objects to enter the ventilation or
exhaust openings as this may cause an electric shock , fire or
damage to the appliance.
insulation layer of wires.
Ensure no water or rain drop into the unit, in order to avoid elec-
tric shock, short circuit or fire.
Clean the surface of the unit with damp cloth (or add some deter-
gent). Do not use corrosive detergent or solvent to clean. Not
allowed to wash directly with water.
Do not handle the power cord and plug by wet hands.
Do not insert the wood or metal stick or other slim objects into air
inlet or outlet.
Do not put heavy objects onto the power cord.
Do not face the wind outlet to babies for a long time.
TECHNICAL SPECIFICATIONS
PRODUCT DESCRIPTION
1. Handle
2. Control dial
3. Thermostat dial
4. Air outlet
5. Body
Model
Rated Voltage
Rated Frequency
Max Capacity Power
Power Setting
Protective Class
Insulation Class
LIH-10
220-240 V~
50 Hz
2000 W
650 W-1300 W-2000 W
I
IP24
OPERATION
Before operation
Note! Since the appliance and its heating coils are slightly greased when delivered, there might be a
slight development of smoke and odour the first time it is used. This is harmless and stops after a
short a while. Be sure to provide for sufficient ventilation during such time.
Warning! Ensure that there is sufficient distance from the wall, fixtures or other appliances. The
distance must be at least 1 m to exclude the risk of fire.
1)Remove all packaging material and keep out of reach of children. After removing packaging, check
the appliance for damage or other signs that could indicate a fault/defect/malfunction. In case of
doubt, do not use the appliance, but contact your vendor for inspection or replacement.
2) Choose a suitable location which is at least one metre away from any obstructions, walls or
inflammable materials (see also safety instructions),
3) Make sure heater is placed on a solid, flat and horizontal surface.
4) Check if the control dial is set to 'OFF' ( ).
5) Fully extend the power cord and plug into a suitable 220-240V~ 50Hz socket. To prevent the
circuit overloading, check that no other appliances are connected to the same group.
Operation
Heater
1) Turn the thermostat dial to maximum (clockwise).
2) Switch the heater on by turning the control dial to one of the following three positions:
Heating at low power (650W)
Heating at medium power (1300W)
Heating at high power (2000W)
3) It is most economical to heat the space at high power, then once the desired temperature is
reached, turn the thermostat dial back slowly until you hear a click. The desired temperature is now
set. The heater will automatically switch on and off to maintain the set temperature.
To set a higher or lower temperature, turn the thermostat dial either clockwise or anticlockwise.
Fan
1) Turn the thermostat knob in anticlockwise to the minimum position, then turn the switch to the
position < >for the fan function.
2) You may use the fan throughout the year to circulate the air in the room.
Overheat Safety Device:
Your heater is fitted with a safety device to switches
off the heating function in the event of overheating.
If the safety device operated, the heating function stop, the fan continue to run to dissipate the
heater and let heater completely cool, once the temperature is below the operated temperature of
safety device, the heater will restart to heat.
If the heater fails to operate or the safety device switches the heater off again, return heater to your
nearest service center for examination or repair.
Safety warning & Safety Precautions
In order to use the product more conveniently and avoid any danger caused by wrong operation
，
please pay close attention to the notices instructed by sign hereinafter. And then read the instruc-
tions carefully.
●
Symbol introduction
GB
54
|
55