GB
36
|
37
ASSEMBLY
For free standing: (Fig. 4)
1. Attach the two plastic feet to the bottom of
the appliance with the delivered screws.
2. Be sure to place the convection heater on a
fl at surface.
Installing and fi xing the device (Fig 6, Fig 7, Fig 8):
1. Fix the wall brackets (Fig.6) to the wall with the provided screws from
the packaging.
2. Hang the heater the fi xed wall bracket (Fig. 7).
3. Fix the lock pieces with the provided screw to the two top holes on the top of wall
bracket (Fig. 8).
Caution:
Double check the safe distance according to Fig. 5.
Lock piece
For wall mounting:
Finding a suitable location (Fig. 5)
The device must be installed so that airfl ow is not obstructed.
1. The installation must be done by the service agent or similarly qualifi ed persons in
order to avoid a hazard.
2. Respect the minimal distances between the device and the ceiling, the ground, and
to the left and right walls.
Fig. 4
!
Fig. 5
Fig. 6
Fig. 7
Fig. 8
•
Minimum distance to the ceiling: 60 cm
•
Minimum distance to the ground: 30 cm
•
Minimum distance to the left/right side or infront of the heater: 30 cm
min. 60 cm
min. 30 cm
min. 30 cm
min. 60 cm