56
|
57
OPERATION
Connect the power cord to the correct power supply; all indicators and buttons will light up
and then will be off.
Desired setting will be confirmed 3s after the operation.
Switch On / Switch Off the Unit [Standby button]
1h
2h 4h 6h 8h
Press the power button once to turn on the unit, the unit runs by default mode on manual
continuous dehumidifying with medium fan speed.
Press the power button to turn off the unit, it will stop working, fan will work for some
seconds to blow out the hot air inside the unit.
Auto Shut-off Timer Function [ Timer button ]
Press the fan speed button to select your preferred fan speed setting of low, medium and high
to meet the different usage requirements.
Fan speed button is invalid at laundry drying mode, auto mode and defrost mode.
Press the up/down buttons to select your preferred humidity from CO-30%-35%-40%-45%-
50%-55%-60%-65%-70%-75%-80%-CO. CO means continuous dehumidifying regardless of
ambient humidity
Anion Function [Anion button]
Press the anion button to switch on the anion function to fresh up the air quality.
Anion function will be off automatically when the fan stops working.
Auto Dehumidifying Function [ Auto button ]
Press the auto button to select the auto dehumidifying mode, the unit runs automatically
accordance to the ambient humidity detected below.
Fan speed button and up/down buttons are invalid.
Press the timer button to select your preferred timer hour from 1h-2h-4h-6h-8h-cancel
for automatic shut off by each press.
Auto timer off setting will be canceled if press timer button for 2 times in 5 seconds.
Auto timer off setting will be canceled if switch off the unit and switch on again.
Fan Speed Option [Fan Speed button]
1h
2h 6h 8h
4h
1h
2h 4h 6h 8h
1h
2h 4h 6h 8h
1h
2h 4h 6h 8h
1h
2h 4h 6h 8h
Ambient RH% detected
RH%
＞
65%
55 RH% 65
RH%
＜
55%
Compressor
Working
Working
Stop working
Fan Speed Level
High
Medium
Low
Humidity Setting [ Up and Down buttons ]
GB
≤
≤
