Ayce 7613164329301, Оригинальное руководство пользователя

Страница: 70 / 80

WARNING
!
Don’t use this machine on plaster.
• Wear safety goggles and dust mask.
• Where possible, secure smaller work-piece to prevent them from moving under
the sander.
• Lower the sander in contact with the work-piece without pressure and then start
the sander. Move the sander slowly over the surface of the work-piece in a circular
or curved motion with an even, moderate pressure.
• If there are still scratches on your work after sanding, try either of the following:
• Go back to a coarser grit and sand the marks out before recommencing with the
original choice or,
• Try using new sanding sheet of the same grit to eliminate the unwanted marks
before progressing to a finer grit and finishing the job.