1
ALYA LOP Contents
ALYA Serial Communication LOP
Mounting Dowels and Screws
User Manual and Installation Manual
Terminating Resistor for systems without a shaft pit board with CAN interface.
SD Card
1- Mechanical Installation
1.1
Open the front cover by pressing the spring mechanism at the bottom center of
the ALYA LOP with a screwdriver.
1.2
Mark the holes of screws and cable by placing the rear plate onto wall you want
to install.
1.3
Drill the holes (shown on Figure 3 by X) for M6.5 dowels.
1.4
Open a hole in the wall through which the rectangular socket of the panel with
sizes 40x28mm can pass (shown as E in Figure 3)
1.5
Insert the four dowels into the drilled holes (X).
1.6
Attach the backplate on the wall by using 4 M4x30 screws to complete
mechanical installation.
Figure 1
Figure 2
Figure 3
