7
System Page
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Exit Setup
4.1 TV TYPE
- it is used to select the TV mode.
Please select this option as per your TV set.
Options: PAL/AUTO/NTSC
4.2 AUDIO
- select preferred audio language.
(DVD only - need disc software support)
4.3 SUBTITLE
- select preferred subtitle language.
(DVD only - need disc software support)
4.4 DISC MENU
- select preferred disc menu language.
(DVD only - need disc software support)
4.5 PARENTAL
- select rating levels. You must set
PASSWORD MODE ON and then enter password to enable
this selection. (DVD only - need disc software support)
4.6 PASSWORD
Options: Change
Select to change password
4.6.1 OLD PASSWORD
4.6.2 NEW PASSWORD
4.6.3 CONFIRM PWD
Procedure to change password:
1) Enter old password in the OLD PASSWORD row.
2) Enter new password in the NEW PASSWORD row.
3) Enter the new password again in the CONFIRM PWD row.
You may reset the password if you forget the old password by
using the supervisor password: 1389
4.7 DEFAULT
- Reset to factory settings.
EXTERNAL MEMORY MEDIA OPERATION (USB
&SD/MMC CARD)
Prepare the player for External Memory media operation
1. Slide the POWER switch to ON position, plug a USB
memory stick filled with Audio/video files into the USB port
or insert the SD/MMC card into the card slot, the USB or
the SD/MMC card is successfully detected and read after a
few seconds, at the same time, the TV screen will show all
its folders.
2. You may play the files stored in the storage media much in
the same way as you do the MP3 disc.
Note: Press and hold STOP button to make change between
Dvd, Mcr and Usb by pressing Navigation up/down button on
the remote.
CAUTION: To avoid electronic static discharge, don't touch
the USB port and card slot during playback.
DISC HANDLING PRECAUTIONS
y
Hold the disc by the edge so the surface will
not be soiled with finger prints. Finger prints,
dirt and scratches can cause skipping and
distortion.
y
Do not write on the label side with a ball-point
pen or other writing utensils.
y
Do not apply benzine, thinner, and liquid that
prevents against static electricity.
y
Be careful not to drop or bend the disc.
y
Install only one disc on the disc tray.
y
Do not try to close the disc tray when the disc is
not in stalled properly.
y
Be sure to store the disc in its case when not in
use.
TROUBLESHOOTING
If your DVD player does not seem to be functioning properly, check the items below before you contact an authorized service
center.
Symptom Check
Power does not turn on or
suddenly turns off.
y
Make sure the car adapter is securely plugged into cigarette lighter socket.
y
Turn the power off and then back on.
No picture or sound
y
Check that the A/V cables are securely connected.
y
Check that the disc is a DVD (region number 2 or all), DVD-RW or AUDIO CD.
y
Do not use a disc that has scratches or dirt.
y
Check that the label-side of the disc is facing up.
y
The pick-up lens of the DVD player may be dirty. Contact the service center for lens
cleaning.
y
Check that the TV channel is set to VIDEO or AV if viewing with a TV.
No picture
y
Check that the LCD display is turned on.
No sound
y
Check that the display panel is open. If it is closed, audio will not be output to the speakers.
y
Check the volume setting. If set to zero, turn up volume level.
y
Check that the headphones are plugged into the PHONES socket. Speakers cannot be
used with the headphones.
No picture and sound
y
Check that the car adapter is properly connected.
Distorted video or sound
y
Use a disc without scratches or dents.
