Axxess RFASWC Скачать руководство пользователя страница 5

5

Setting up the RFASWC

1)  Press the 

Red

 and 

Green

 buttons simultaneously for 5 seconds. Then press 

Volume Up for 2 seconds (this will orientate your button direction).

2)  Turn the ignition on and press Volume Up on the RFASWC. This will “marry” the 

RFASWC to the interface.

Remapping the SWC Buttons

Programming

1)  Turn the ignition on; the LED ont the RFASWC interface will start flashing rapidly, 

which means the RFASWC is looking for the radio.

 Note:

 If the LED did not start flashing rapidly, press the reset button for 3 

seconds, let go, and then proceed to Step 2.

2)  After a few of seconds, the LED should stop flashing rapidly, and go out for 

approximately 2 seconds.

3)  The LED will then flash up to 15 times, depending on what radio is  

connected to it.

 Tip: 

Knowing this will help if you need to troubleshoot; refer to the  

 

LED Feedback Legend.

4)  This is the end of the auto detection stage. If the RFASWC programmed 

successfully, the LED will light up solid.

Let’s say you have the RFASWC programmed to your radio and you want to   
change the button assignment. For example, you would like Seek Up to be Mute. 
Follow the steps below to remap the buttons:

1)  Make sure the RFASWC interface is visible, so you can see the LED flashes to 

confirm button recognition.

 Tip: 

Turning off the radio is recommended.

2)   Within the first 20 seconds of turning the ignition on, press and hold Volume Up 

on the RFASWC until the LED goes solid.

3)   Release Volume Up and the LED will go out. Volume Up has now been 

programmed.

4)   Refer to the Button Assignment Legend to reference the order in which the 

buttons need to be programmed.

 

Note: 

If the next function on the list is not on the RFASWC press Volume Up 

for 1 second, until the LED comes on, and then release Volume Up. This will 
tell the RFASWC that the function is not available and it will move onto the 
next function.

5)   To complete the remapping process, press and hold Volume Up on the RFASWC 

until the LED goes out.

RFASWC Installation

Содержание RFASWC













Отзывы: