AXGMLN-01
2
Applications
From the 16-pin harness with stripped leads to the aftermarket radio:
• Connect the
Red
wire to the accessory wire.
Note:
If installing an AXSWC (sold separately), there will be an accessory wire
there to connect as well.
• If the aftermarket radio has an illumination wire, connect the
Orange/White
wire to it.
• If the aftermarket radio has a mute wire, connect the
Brown
wire to it. If the
mute wire is not connected, the radio will turn off when OnStar is activated.
• Connect the
Gray
wire to the right front positive speaker output.
• Connect the
Gray/Black
wire to the right front negative speaker output.
• Connect the
White
wire to the left front positive speaker output.
• Connect the
White/Black
wire to the left front negative speaker output.
The following (3) wires are only for multimedia/navigation radios that require these wires.
• Connect the
Blue/Pink
wire to the VSS/speed sense wire.
• Connect the
Green/Purple
wire to the reverse wire.
• Connect the
Light Green
wire to the parking brake wire.
Connections to be made
† These vehicles are standard for a factory amplifier. Either use the AXGMLN-02 interface,
or bypass the amplifier.
‡ Only for models without NAV in 2011-2015. For models with NAV, use the AXGMLN-08.
∆
Only for models without NAV in 2012-up. For models with NAV, use the AXGMLN-08.
BUICK
Enclave 2008-up
Lucerne 2006-2011
CADILLAC
DTS †
2006-2011
Escalade, Escalade ESV & EXT †
2007-2011
SRX †
2007-2009
CHEVROLET
Avalanche
∆
2007-2013
Captiva Sport
2012-2015
Equinox 2007-2009
Express ‡
2008-up
Impala 2006-2013
Impala
Limited
2014-2016
Monte Carlo
2006-2007
Silverado (new body)
∆
2007-2013
Silverado 2500/3500
∆
2014
Suburban
∆
2007-2014
Tahoe
∆
2007-2014
Traverse 2009-up
GMC
Acadia 2007-2016
Acadia
Limited
2017
Savana ‡
2008-up
Sierra 2500/3500
∆
2014
Sierra (new body)
∆
2007-2013
Yukon / Yukon XL
∆
2007-2014
HUMMER
H2 †
2008-2009
PONTIAC
Torrent 2007-2009
SATURN
Outlook 2007-2010
Vue 2008-2010
SUZUKI
XL-7 2007-2009
