Axxess AXDSP-L Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 22

Axxess AXDSP-L Скачать руководство пользователя страница 3

3

REV. 3/2/2020 INSTAXDSP-L

Aftermarket radio system:

The

AXDSP-L

can be used with an aftermarket radio to improve the overall listening experience for

car audio enthusiasts. Installers will connect the RCA inputs from the

AXDSP-L

to the outputs from

the aftermarket radio;

Front

,

Rear

. When using an aftermarket radio with the AXDSP-L,

General

must be chosen for the vehicle type.
(refer to page 4)

Adding a subwoofer to an OEM System:

This feature offers the Installer the ability to add an aftermarket subwoofer to an OEM system. If the
vehicle is equipped with noise canceling microphoness, they must be disabled for this type of system.
(refer to page 5)

Adding a full-range amplifier and subwoofer* to an OEM system:

Similar to adding a subwoofer as mentioned prior, except for one extra step required to configure
the harness for a full-range setup. Also note, if only adding the

AXDSP-L

to just the front or rear

channels is desired, this can be accomplished by just using the necessary front or rear speaker wires
and leaving the other speaker wires still connected.
(refer to page 6)
* Subwoofer is optional

Stand-alone Bluetooth system:

The AXDSP-L and AXDSP-BT can be used together as a stand-alone system and used in just about
any 12V DC application. Perfect applications would be classic car installations where the dashboard
cannot be altered, or in UTV vehicles. This can even be used inside a home with a 12v DC power
supply. The options are endless and only limited by ones creativity.
(refer to page 7)

Aftermarket Radio Systems

1.

Complete all necessary connections to the radio and vehicle, but leave the amp

turn-on wire disconnected.

Continue to All Systems

Factory Radio Systems

1.

Remove the factory radio*, then unplug all connectors.

2.

Install the vehicle specific T-harness (sold separately) and make all necessary

connections, but leave the amp turn-on wire disconnected.

* Refer to Metra online for dash disassembly. If Metra makes a dash kit for the

vehicle, disassembly will be within the instruction booklet.

Continue to All Systems

All Systems

1.

Plug the

20-pin

AXDSP-L

harness into the

AXDSP-L

.

2.

Plug the

16-pin

AXDSP-L

harness into the

AXDSP-L

.

3.

Download and install the

AX-DSP-X app

from the

Google Play Store

or

Apple App

Store.

4.

Open the app then select

Bluetooth Connection

tab. Follow the instructions to pair

the mobile device to the

AXDSP-L

.

5.

Scroll to the

Configuration

tab then select the vehicle type. Press the

Lock Down

button to save the configuration.

6.

Connect the amp turn-on wire.

7.

Adjust the settings in the app as desired. Press the

Lock Down

button to save any

new configurations.

INSTALLATION OPTIONS

INSTALLATION

«
1
2
3
4
5
...
»

Содержание AXDSP-L























Отзывы:

Нет отзывов