Axxess AXDIS-VW1, Руководство по установке, Страница: 1 / 8

CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
AXDIS-VW1
I N S TA L L AT I O N I N S T R U C T I O N S
AxxessInterfaces.com
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 2/4/20 INSTAXDIS-VW1
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell
caps, etc.)
TABLE OF CONTENTS
Connections to be made ....................................2-3
Installing the AXDIS-VW1 interface.......................3
Programming the AXSWC interface .....................4
Screen operation ................................................5-6
Volkswagen
Data Interface with SWC
& Factory Display Retention 2008-2016
• Provides accessory power
• Retains R.A.P. (retained accessory power)
• Designed for non-amplified models, or amplified models
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains audio controls on the steering wheel
• Retains balance and fade
• Retains most of the vehicle information that was displayed on the
factory radio *
• Compatible with Fender amp
• Micro-B USB updatable
*
Attention! The aftermarket radios backup camera input will be used to
display the vehicle settings. If the radio doesn’t have a backup camera
Input, then there will be no visualization of the vehicle settings. An
externally mounted screen could be substituted in this situation.
APPLICATIONS
VOLKSWAGEN
EOS 2009-2016
Golf 2008-2013
Multivan 2010-2015
Passat * 2010-2015
Polo 2009-2014
Scirocco 2011-2015
Sharan 2010-2015
Tiguan 2011-2015
Touran 2010-2015
* For models with rear parking sensors
• AXDIS-VW1 interface
• AXSWC interface • AXDIS-VW1 harness
• AXSWC harness
• Female 3.5mm connector with stripped leads