Axxess AX-TYAMP2-SWC Скачать руководство пользователя страница 2

Страница: 2 / 8

CONNECTIONS TO BE MADE

From the 16-pin harness with stripped leads to the aftermarket radio:

• Connect the

Blue/White

wire to the amp turn on wire. This wire must be connected to hear

sound from the factory amplifier.

• Connect the

Gray

wire to the right front positive speaker output.

• Connect the

Gray/Black

wire to the right front negative speaker output.

• Connect the

White

wire to the left front positive speaker output.

• Connect the

White/Black

wire to the left front negative speaker output.

• Connect the

Green

wire to the left rear positive speaker output.

• Connect the

Green/Black

wire to the left rear negative speaker output.

• Connect the

Purple

wire to the right rear positive speaker output.

• Connect the

Purple/Black

wire to the right rear negative speaker output.

• Tape off and disregard the following (6) wires, they will not be used in this application:

Blue/Pink

Brown

Green/Purple

Light Green

Orange/White

Red

From the AX-TYAMP2-SWC harness to the aftermarket radio:

• Connect the

Black

wire to the ground wire.

• Connect the

Yellow

wire to the battery wire.

• Connect the

Red

wire to the accessory wire.

• Connect the

Blue

wire to the power antenna wire.

• If the aftermarket radio has an illumination wire, connect the

Orange

wire to it.

The following (1) wire is for an aftermarket multimedia/navigation radio that requires this wire.

If not required, tape it off and disregard it.

• Connect the

Green/Purple

wire to the reverse wire.

• If retaining the factory AUX-IN jack, connect the

Red

White

RCA jacks to the AUX input.

Continue to 3.5mm jack steering wheel control retention

Содержание AX-TYAMP2-SWC









Результаты поиска

Содержание AX-TYAMP2-SWC

Отзывы:

Похожие инструкции для AX-TYAMP2-SWC

Бренды по названию

Популярные бренды

Axxess AX-TYAMP2-SWC, Руководство по установке

Результаты поиска

Содержание AX-TYAMP2-SWC

Отзывы:

Похожие инструкции для AX-TYAMP2-SWC

Бренды по названию

Популярные бренды