Axxess AX-AM-MB92, Руководство по установке

Страница: 4 / 8

4
INSTALLING THE AX-AM-MB92
• Remove the main connector from the radio, then connect the male plug from the
AX-AM-MB92 harness into the radio.
• Connect the factory
male
factory connector into the
female
plug from the
AX-AM-MB92 harness
.
• Connect the AX-AM-MB92 harness into the AX-AM-MB92 interface.
• Connect one end of the 3.5mm extension cable to the AX-AM-MB92 harness , then connect
the other end to the
USB dongle
. The
USB dongle
will be discussed later.
• Remove the Blue LVDS (video) cable from the radio, then connect it to the AX-AM-MB92
interface (LVDS OUT). (Figure A)
Note
:
An LVDS extension cable is provided if more length is required.
• Connect the 6-pin to 4-pin LVDS (video) cable into the radio, and then into the
AX-AM-MB92 interface (LVDS IN).
• Connect the 10-pin harness with RCA jacks into the AX-AM-MB92 interface.
(Figure A –
Picture shown for illustration only, actual radio may differ
)