3
REV. 5/3/2018 INSTAX-ADDCAM
CONFIGURING THE AX-ADDCAM
Continued on the next page
• Download and install the Axxess Updater program available at: axxessinterfaces.com
• Open the Axxess Updater and wait until the word
“Ready”
is listed in the bottom left of the screen.
• Select “Add-Cam Configuration.
• Select the vehicle in the drop down list. If the vehicle is applicable, a tab labeled
“Configuration” will appear.
• Under “Make” and “Model”, there will be an option labeled “Other (Generic)”. This option is for
aftermarket radio installations where the AX-ADDCAM will be controlled via analog triggers.