`
K
NOWLEDGE IS
P
OWER
E
nhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
Metra recommends MECP
certified technicians
IMPORTANT
If you are having difficulties with the installation of this product,
please call our Tech Support line at 1-800-253-TECH. Before doing
so, look over the instructions a second time, and make sure the
installation was performed exactly as the instructions are stated.
Please have the vehicle apart and ready to perform troubleshooting
steps before calling.
AxxessInterfaces.com
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
REV. 6/20/17 INSTASWC-TOY-LEX
I N S TA L L AT I O N I N S T R U C T I O N S
ASWC-TOY-LEX
1.
Turn the ignition on, and wait three seconds.
2.
Press the reset button for three seconds, then let go.
3.
Once flashing fast, wait until the L.E.D. in the ASWC-TOY-LEX lights up solid (about twenty seconds).
Note:
• Do not press any buttons on the steering wheel or radio during this time.
• If the ASWC-TOY-LEX does not flash fast the Reset button was not depressed properly.
4.
Once solid, the ASWC-TOY-LEX is reset and should be working with default settings.
The Axxess Updater App must be used to program the following:
Changing radio type
If the L.E.D. flashes do not match the radio you have connected, you must manually program the
ASWC-TOY-LEX to tell it what radio it is connected to.
Remapping the steering wheel control buttons
If you have ASWC-TOY-LEX programmed and you want to change the button assignment for the steering wheel
controls.
Note:
Volume Up and Volume Down cannot be remapped.
EXTRA FEATURES
RESETTING THE ASWC-TOY-LEX
