27
AVM2210H
OPERATION
Steering Wheel Interface(SWI) Operation
In main screen please press SETUP and select SWC. It will show as below.
Description
1.Functions
2.Reset to default
3.Press to return to auto save after programming
1
3
2
UNIT
SWC-IR INPUT
3.5mm Jack
Steering Wheel learning Process
Before learning, press to reset Reset icon to remove any previous settings.
1. Press the desired button on the steering wheel control.
2. Then press the desired function as shown above #1.
3. Repeat this procedure until all steering wheel functions have been programmed.
4. Once complete, press "
" to save all settings as shown above #3.
SWC Connecting Wires
AD System (Analog)
KEY 1
KEY 2
KEY GND
KEY 1
KEY 2
KEY GND
IMPORTANT
This unit only works with analog steering wheel controls. Does not support any data-bus
system.
NOTE:
FOR DATA TYPE SWC, please use the Axxess ASWC-1 Steering Wheel Control
module and refer to their website for vehicle wiring information.
IR System (Digital)
Note:
3.5mm SWC input (IR digital system)
should be connected to the digital SWC device
(PAC:SWI-CP5 and Axxess ASWC-1) without
any settings.
