– 8 –
– 9 –
CROSSOVER WIRING
n
Crimp the INPUT-wire and the supply line from the radio using the provided plugs. The
brown marked wire is minus. Finally connect the tweeter wire.
MOUNTING THE DOOR PANEL
n
The install of the speaker system is complete. Follow the steps in reversed way to re-
mount the door panel.
TESTING THE INSTALLED SYSTEM
Slowly turn up the volume of your head unit, and listen for distorted sounds. If everything
appears to be okay and it just sounds right, check out the speaker balance of the left and
right side by adjusting the balance control of your headunit. Shifting the balance to the left
channel should provide you with sounds coming solely from the left speaker system, while
shifting the balance to the right should do the same for the right speakers. If anything
appears to be wrong, you must recheck the wiring of the x-overs, the amp or the mid/
woofers.
TECHNICAL SPECIFICATIONS
Mid Woofer
Mounting depth:
63 mm
Mounting diameter:
138 mm
Max. power handling:
160 W
Power handling:
120 W RMS
Sensitivity 1W/1m:
91 dB
Nominal impedance:
4 ohms
Frequency response:
50 Hz – 25 kHz
Tweeter
Overall diameter
45 mm
Mounting height (flat surface)
23 mm
AC26E46 V-Fit Manual.indd 9
12.02.2008 17:09:20 Uhr
