Axtel AXH-PRX3D, Инструкция по эксплуатации

Страница: 7 / 30

EN
7
3. First start-up
3.1 Connecting the device
Connect the base station to a power source using the power adapter
included in the package.
3.2 Activating the headset
Turning on the headset is done by pressing the MFB for about
1 second.
When the headset is switched on and paired correctly, the MFB will
stop flashing.
3.3 Turning off the headset and the base
To turn off the headset, press the MFB for 5 seconds.
A sound signal in the headset indicates that it has been turned off.
To turn off the base, disconnect the power cable.
3.4 Pairing – connecting a new headset to the base
Place the headset on the switched-off base, then connect the power
supply to the base. When power is connected to the base, the head
-
set will be automatically paired. When the headset has been success -
fully paired with the base station the MFB will stop flashing.
.
Headset included in the package does not require pairing.
4. Headset setup
4.1 Connecting to a desk phone (see Figure 9 and 10)
There are three distinct ways to connect your Prime X3 to a desk
phone:
a) Connecting to a desk phone equipped with a dedicated headset
port.
b) Connecting to a deskphone that does not have a dedicated head -
set port.
c) Optional connection via EHS cable
Note: Some phones require a different cable with an appropriate
plug dedicated to the particular phone model (e.g. Jack 2.5 mm,
Jack 3.5 mm, RJ45).
In this case you need to buy the correct cable
(section 10. Accessories).
https://axtelworld.com/headsets/compatibility/