32
Appendix II: Parallel function
1. Introduction
This inverter can be used in parallel with
three
different operation modes.
1.
Parallel operation in single phase with up to
three
units. The supported maximum output power is
15KW/15KVA.
2.
Maximum
three
units work together to support three-phase equipment. The supported maximum output
power is 15KW/15KVA.
3.
Maximum
three
units work together to support two-phase equipment. One units support two phase. The
supported maximum output power is 15KW/15KVA and one phase can be up to 7.5KW/7.5KVA.
2. Package Contents
In parallel kit, you will find the following items in the package:
Parallel communication cable Current sharing cable
3. Mounting the Unit
When installing multiple units, please follow the illustration below.
20CM
20CM
20CM
50CM
50CM
20CM
NOTE: For proper air circulation to dissipate heat, allow a clearance of approx. 20 cm to the side and approx.
50 cm above and below the unit. Be sure to install each unit in the same height.
