3
Installation Instructions
•
Sit the faucet with black sealing ring in the faucet hole on top of the
mounting surface.
•
From beneath, install the friction washer, metal washer, and mounting nut.
Tighten the mounting nut, taking care not to overtighten.
•
Check the position of the faucet. When satisfied, use a slot-headed
screwdriver to tighten the tensioning screws.
•
Feed the pull rod through the hole in the back of the faucet body.
•
Attach the supply lines to the supply stops with standard 3/8" compression
fittings (not included)
sealing ring
friction washer
metal
washer
mounting nut
tensioning screws
