11
StrikeLight 2 Stun Flashlight User Manual
Chapter 4: Maintenance and Support
3
Plug the USB cable into the charging port.
4
Plug the other end of the charging adapter into the wall power socket. An LED on the battery
charger will light up.
5
Wait for the LED on the battery charger to turn solid green. A fully depleted battery will take
approximately 8 hours to completely charge.
6
Remove the cable from the charging port.
7
Close the charging door.
Dropped or Wet Device
Do not immerse the device in water. Avoid exposing the device to rain. Do not let water splash on the
device. The device is not waterproof or water-resistant.
If your device is dropped or gets wet, do not try to use it until you have performed the instructions
below successfully:
1
Allow the device to dry thoroughly (at least 24 hours). Do not use an external heat source such
as a microwave oven or hair dryer.
2
Point the flashlight in a safe direction and away from your body.
3
Perform a function test. Go to
4
If the device does not work properly, do not use it.
Product Support
If you need product support or have any other questions, please contact customer service at:
[email protected]
U.S.: 1.800.978.2737 or 1.480.905.2000 (tel:14809052000)
International: +1.800.978.2737 or +1.480.905.2000 (tel:+14809052000)
