11
present in the main channel, the card will switch to the backup
channel.
This only works when the backup channel is
Ok
(if that is set in
the setting
Back-up
OK
and if
Sw_Carrier_2
is set to
ON
)
The default setting is
On
Sw_TRS_1
Sw_TRS_1
determines that when the criteria of the TRS are no
longer are fulfilled, it will switch from Main to Backup.
TRS errors are signals that have less than 450 TRS in 250 Lines.
TRS is a sum that is calculated for each video line.
Please note that this only works when the backup channel is Ok
(if set in the setting
Back-up
OK
and if
Sw_TRS_2
set to
ON
)
The default setting is
OFF
Sw_Aud_Sil_1
Sw_Audio_Sil_1
determines that when there is silence in the
embedded audio of the main channel, the card switches to the
backup channel.
Please note that this only works when the backup channel is
Ok
(if that is set in the setting
Back-up OK
and if
Sw_Aud_Sil_2
is
set to
ON
)
The default setting is
OFF
Sw_Freeze_1
Sw_Freeze_1
determines that when there are frozen frames in
the main channel, the card switches to the backup channel.
Please note that this only works, if the backup channel is Ok (if
that is set in the setting Back-up
OK
and if
Sw_Freeze_2
is set
to ON)
The default setting is
OFF
.
Sw_Event_1
Synapse cards can produce events (input lost etc.), if the card is
located in the same frame as the PBS03. In that case the card can
switch from main to backup. With
SW-Event_2
the PBS03 is
set to perform this action.
Sw_GPI_2
W_GPI_2
determines that in case of a GPI closure (GPI contact
one), the MAIN channel is active (for a switch to channel two
close GPI_2 and set the SW_GPI_2 setting to ON).
In
Mode
GPI
should be selected.
The default setting is
OFF
Sw_Carrier_2
Sw_Carrier_2
determines when there is no longer an SDI
carrier present on the backup channel, the card will automatically
