Axminster WS1000TA, Руководство пользователя

Страница: 8 / 44

08
Specific Safety Precautions
General Safety Notes
Woodworking machines can be dangerous if not used
properly. Therefore the appropriate general technical
rules as well as the following notes must be observed.
Read and understand the entire instruction manual
before attempting assembly or operation.
Keep these operating instructions close by the
machine, protected from dirt and humidity, and pass
them over to the new owner if you part with the tool.
No changes to the machine may be made.
Daily inspect the function and existence of the safety
appliances before you start the machine.
Remove all loose clothing and enclose long hair.
Before operating the machine, remove tie, rings,
watches, other jewellery, and roll up sleeves above
elbows.
Wear safety shoes; never wear leisure shoes or sandals.
Always wear the approved working outfit.
Do not wear gloves while operating the machine.
For the safe handling of cutting tools wear work gloves.
Control the stopping time of the machine, it may not
exceed 10 seconds.
Remove cut and jammed workpieces only when the
machine is at a complete standstill and motor is turned
off.
Install the machine so that there is sufficient space for
safe operation and workpiece handling.
Keep work area well lit.
Model WS1000TA
Product Code 501209
Rating Trade
Power 2.8kW (230V, 1ph)
Spindle Travel 100mm
Spindle Diameter 30mm
Max Spindle Projection above Table 100mm
Max Tooling Diameter Above Table 200mm
Max Tooling Diameter Below Table 180mm
Table Height 900mm
Table Size 1,000 x 360mm
Min Extraction Airflow Required 1,000m³/hr
Dust Extraction Outlet 100mm x 2
Overall L x W x H 1,010 x 690 x 900mm
Weight 218kg
Specifications