Axminster Workshop AW200BDS, Оригинальное руководство пользователя

Страница: 18 / 24

MAINTENANCE
18
DISCONNECT THE SANDER FROM
THE MAINS SUPPLY BEFORE
CONTINUING!
There is very little mechanical maintenance that can be
carried out on the machine. Most prudent maintenance
is preventative and concerned with keeping the machine
clean.
• At reasonable intervals, inspect and remove all dust/resin
build up using a class ‘M’ vacuum cleaner.
• Remove the sanding disc table (C) and extraction plate
and clean any dust or resin build up. Inspect the sanding
disc for signs of wear and tear and replace if necessarily.
Re-assemble the sander.
ALWAYS WEAR EYE PROTECTION
AND DUST MASK BEFORE
CONTINUING.
• Remove the linishers table assembly (B), remove all the
guarding as explained on pages 15-17. Clean any dust or
resin build up, inspect the sanding belt for signs of wear
and tear and replace if necessary. Re-assemble the sander.
• If the sander is not going to be used for a period of time,
use ‘Ambersil Dry PTFE Film Antistick’, spray, code 952137
over the work tables and place a dust sheet over the sander.
C
B