Axminster Trade ATM25, Инструкция по эксплуатации

Страница: 16 / 28

Setting Up the Morticer
16
Fig 25-26-27
Front to Back Movement
Pull the wheel out to engage the drive gear into the lead screw
thus enablining the table to move from front to back, see figs
25-26-27.
Gear meshed with lead screw
Table Distance Stops
To the rear of the worktable there are two collar stops
to set a required distance for repetitive work.
Loosen the collar clamping handle (A) and slide the collar (B)
along the collar stop bar (C) until required distance is reached
then re-tighten the handle to lock the collar in position. Repeat
for the other collar, see figs 28-29-30.
Fig 28-29-30
B
A
C
Collar stop block
Collar stop assembly