Axminster SX4-DIGI, Оригинальное руководство пользователя

Страница: 11 / 30

9
button to “TAPPING” ） ，push the button on the spindle handle , the machine
can tapping in direct-adverse direction, and on the LCD screen there will
be “FORWARD”or “REVERSE”to show the present condition.
6、When you want to use the small feed function, firstly you tight the handle
on the right, the 3 operate handle with button was locked ,and then switch
the small feed handle on the right can real the small speed adjustment.
7、Push the button “ UP” or “DOWN” to control the spindle (Z) move high
or low . “UP” is up quickly, and “DOWN” is down quickly. The machine
cannot use this function when the machine is milling. The cutter is adjust
before milling, you can adjust the cutter to right place according to the
height you want to cutting, and then lock the spindle handle and make the
machine working .
8、Horizontal milling can be realized by spindle rotation. First ,loose the
fix parts on the left land; Secondly, rotation the spindle and let go your
hand, .When you rotate it to left, there will be a limit angle to prevent
the angle more than 45
0
. When you rotate it to right it can realize the
function of horizontal milling, you can see the angle number on the LCD,
rotate it to the angle you need and then lock the 3 nuts.
9、Push “EMERGENCY STOP” , and the machine will be stopped. In urgently moment,
push the “EMERGENCY STOP”button , the machine can stop at once ,and then
you can deal with the question. When the question settled, you can start the
machine again.