Axminster D.R.O. Micro Drill, Руководство пользователя

Страница: 7 / 16

W H I T E
A X M I N S T E R
W
07
Specific Safety for Drilling Machines...
FREEPHONE
0800 371822
9. NEVER remove 'flying' swarf strands from the drill whilst it is turning.
10. It is a good precaution to wear eye protection when drilling, especially using small drills,
or very hard material that produces small chips.
11. It is not a good idea to wear gloves when operating a drill press.
12. After the job is completed, remove all tools and accessories from the machine, check
that drill bits are still sharp and re-useable. Clean the machine down thoroughly, including
removing coolant or cutting compounds from the drill table. Lightly coat all metal surfaces
with a light oil coating. Disconnect the machine from the supply. Secure the cable/plug clear
of the floor.
Initial Assembly Instructions...
Please refer to the Assembly Drawing if you experience difficulties, this will enable
you to more readily identify those parts of the machine to which we will be referring.
Having unpacked your Micro Drill machine and all its components, please check against the
'What's in the box' list above. If any parts are missing please contact your supplier or our
Customer Services personnel straight away using the numbers listed in the Axminster
catalogue. Having unpacked the machine and checked it over, please store the packaging
for a short period in case the machine needs to be returned to your supplier or ourselves
for any reason.
The machine comes largely assembled
Take out all the parts from the package carefully.
4
3
2
5
7
6
10
21
22
Fig 1
Fig 2