Axminster AWBB, Руководство пользователя, Страница: 8 / 24

Main saw frame The main body of the machine that all the other parts are mounted upon.
(See fig 3)
Upper and lower The two doors that cover the upper and lower saw wheel compartments.
cover doors There are interlocks fitted to both doors so that the machine cannot operate
(See fig 3) if either door is left open.
Upper saw The upper saw wheel is mounted on double bearings on an axle that is
wheel mounted to a tilting plate. (To provide the fore and aft tilt movement that
(See fig 4) controls the blade tracking). The tilting plate is hinged to a base plate that is
mounted in slides in the upper saw wheel compartment. (The base plate
slides up and down allowing increasing or decreasing of the blade tension).
The saw wheel is fitted with a rubber tyre to give better grip to the saw blade,
and smoother running. It also allows the blade to be tracked in the centre of
the wheel; unlike the bad old days when the blade had to be tracked off the
front edge of the wheel to safeguard the teeth.
Blade tensioning The blade tensioning wheel, at the top of the machine, is connected
wheel to a threaded rod that is engaged in the base plate of the upper saw wheel
(See fig 4a) axle assembly. The threaded rod is anchored in the top of the saw frame
which allows the base frame to be driven up and down in its mounting slides
and tension or de-tension the blade.
Upper blade The upper blade guide assembly mounts the two side bearings and the rear
guide and thrust bearing that keep the blade stable (straight and untwisted) above the
guard table during the sawing operation. The guard is an integral part of the guide
(See fig 3) mounting leg to which the guide assembly is bolted so it is always in place
when the guide is raised or lowered to its working position.
08
W H I T E
A X M I N S T E R
W
Specification...
Axminster No. 700124 (AWBB)
Motor Input 240V a.c, 50Hz, 1448 rpm, 750W
Motor Output: 550W
Wheel Diameter: 315mm
Blade Speeds: (Off Load) 360 & 720 m/min
Blade Length: 2240mm
Max Depth of Cut:(Throat) (Upright) 160mm
Max Max Cutting Width: (Table Flat) 300mm
Blade Width Min/Max: 6mm (1/4") 16mm 5/8"
Table Tilt: 0-45˚ degrees
Dust Extraction Outlet: 96mm
Overall Size L x W x H: 710mm x 675mm x 1075mm
Supplied Cable Length 2 Metres
Weight 80 kg
Identification and Parts Description...