Axminster AW1416VS, Руководство пользователя

Страница: 11 / 20

W H I T E
A X M I N S T E R
W
10
Indexing Operation...
FREEPHONE 0800 371822
Open the access panel, turn the headstock wheel until the pre-drilled hole in the headstock lines up
with one of the 24 pre-drilled hole positions on the index pulley. (See figs 10,11 & 12)
Fig 10 Fig 11
Locate the 24 index pin (F) and slide the pin into the pre-drilled holes to lock the pulley to the desired
position.
Fig 12
Fig 13
The picture above shows the index
number is set to position 01.
The picture above shows the index
number is set to position 23.
Fig 14 Fig 15
The indexing facility is useful for fluted columns, clock faces and accurate hole positioning. The
indexing pulley has 24 positions (15˚) indexing using the supplied index pin
(F) .
F
1-24 index
positions
Pre-drilled hole
Headstock
wheel
Access panel
Note: The index pin (F) has a magnetic base, enabling the pin to
be attached to the lathe to prevent it from being lost.