background image

Index of Contents

2

Index of Contents 

02

Declaration of Conformity 

02

What’s in the Box 

03

Optional Accessories 

04

General Instructions for 230V Machines 

04-05

Specific Safety Instructions for Woodturning Lathes 

05

Specifications 05
Assembly Instructions 

06-07

Illustration and Description 

08-09

Indexing Operation 

10

Removing Drive/Live Centres 

11

Changing the Belt Speed 

12

Maintenance 13
Parts Breakdown 

14-15

Parts Lists 1-2-3 

16-17-18

AW1416VS Lathe Stand (Optional) 

19

Wiring Diagram 

20

Declaration of Conformity

Copied from CE Certificate

The undersigned, authorised by  Calvin Chou 
The Kingcraft Machinery Company Limited
No. 26 Chung Gong Yeh 12 rd, Da-Li City, Taichung 
County, Taiwan declares that this product:

 
Woodturning Lathes

1643INV, 1417, 1643, 1417INV, 1430, 
1430INV, 1443, 1443INV, 1643INV

Manufactured by The Kingcraft Machinery Company 
Limited is in compliance with the following standards 
or standardisation documents in accordance with 
Council Directives 
 

Machinery Directive: 2006/42/EC 
Low Voltage Directive: 2006/95EC 
Electromagnetic Compatibility Directive: 
2004/108/EC

Warning

The symbols below advise that you follow 
the correct safety procedures when using 
this machine.

Fully read manual

and safety instructions

before use

Eye protection

should be worn

Ear protection

should be worn

HAZARD

Motor gets hot

Dust mask

should be worn

Please read the Instruction Manual prior to using 
your new machine; as well as the operating 
procedures for your new machine, there are 
numerous hints and tips to help you to use the 

machine safely and to maintain its efficiency and 
prolong its life. Keep this Instruction Manual readily 
accessible for any others who may also be required to 
use the machine.

Содержание AT1416VS





















Отзывы: