Axminster 107698, Оригинальное руководство пользователя

Страница: 23 / 32

20
5.4 Removing/Replacing filter bag
Remove and replace the filter bag when it is about 1
⁄ 2 full.
To remove & replace filter bag or bags:
1. DISCONNECT MACHINE FROM POWER!
2. Release clamp around bottom of canister filter, then
remove filter bag.
3. Attach new filter bag around bottom of canister filter and
secure with clamp.
5.5 Removing/Replacing canister filter
If the canister filter is clogged or dirty and cleaning or
washing it does not improve dust-collection performance,
the canister filter must be replaced.
To remove and replace canister filter:
1. DISCONNECT MACHINE FROM POWER!
2. Loose the
hexagon socket button screw M6X15 which
fixed the seal pad and canister filter to the main housing
assembly.
3. Fix the seal pad and new canister filter to the main
housing assembly by the screw M6X15.
5.6 Washing canister filter
For a more thorough cleaning every few months under heavy use, wash the filter by hand.
To wash canister filter by hand:
▲
DISCONNECT MACHINE FROM POWER!
▲
Remove canister filter (see Removing/ Replacing Canister Filter on this page).
▲
Rinse filter outside under warm water.
IMPORTANT: DO NOT use a pressure washer to clean the filter, or compressed air to dry it.
High pressure will damage filter fibers.
▲
Allow filter to air dry only.
Note: Do not leave filter in the sun to dry or apply heat to speed the process; heat exposure
can damage your filter.
▲
Re-install canister filter.
▲
Dust exposure created while using machinery may cause cancer, birth defects, or
long-term respiratory damage. Always wear goggles and a NIOSH approved
respirator when working with the dust collection bags or canisters.