manualshive.com logo in svg

Axminster 107657, Оригинальное руководство пользователя

Поделиться
Скачать
Axminster 107657 Скачать руководство пользователя страница 17

Operating Instructions

17

Removing the Faceplate

Live Centre Nose Cone

1. Locate the spindle locking pin (P), rotate the spindle until 
the machined hole on the shaft lines up with the spindle collar 
access hole.  Insert the locking pin to lock the spindle, undo the 
two locking grub screws on either side of the boss, see 46-47.

Fig 46-47

2. Place the supplied spanner (C) over the boss and remove the 
face plate, place safely aside, see fig 48.

Fig 48

P

Grub screw

Hex key

Spindle collar

Face plate

C

Fig 49-50

The live centre features a removable front nose cone revealing 
a small centring pin for turning small work. Removing the pin 
allows you to use the hollow live ring centre for holding your 
work piece such as bowls.

1. To remove the front nose cone locate the live centre push
rod (D), rotate the cone until you can see daylight through
the machined hole on the main body. Insert the rod through
the hole thus locking the spindle, see fig 49. 

2. Rotate the nose cone to remove it from the main body
and place safely aside, see fig 50.

Continues Over....

D

D

Machined hole

Nose cone

Содержание 107657

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды