Axminster Craft AC82E, Оригинальное руководство пользователя

Страница: 8 / 20

Assembly
8
The extractor assembly (A) can be
mounted either way up, giving a
choice of inlet positions on the top
or the bottom of the machine.
9
8
7
6
Centre mounting hole
for hanger bar (F)
Mounting holes
for panels (C)
Mounting holes
for panels (C)
C
A
L N P K
D
• Place one dome head Hex screw (K) into one of the
centre mounting hole from inside the extractor assembly
(A) casting, see step 10.
• Turn the extractor (A) over, locate another four Hex screws
(K) and screw them into the two threaded mounting holes
on either side of the extractor, see step 11-12.
Mounting holes on both sides of extractor assembly