Axminster Craft AC150WSG, Оригинальное руководство пользователя, Страница: 6 / 12

6
Illustration and Parts Description
Grinding machine
Essentially a double ended motor, with a mounting base,
the motor flanges mount the wheel guards. The motor
base contains the On/Off NVR switch.
Wheel guards
Two formed metal guards that enclose the grinding
wheels. They are each formed in three parts. The inner
part is mounted onto the motor flange, The stone cover is
‘sprung’ into the lip of the inner part and the outer part is
located on it. The whole assembly is bolted together. There
are various ‘hard point locations’ that accept the fixing
bolts that secure the attachments of the machine.
Tool rests
Formed metal plates that bolt onto a hard point on the
inside cover of the wheel guard. There is an elongated slot
in the rest which gives adjustment along the coach bolt
fixing. Eye shield/ spark guards
Clear protective shields that mount over the grindstone to
afford a view of the workpiece, but offer protection for the
eyes, They are mounted onto the spark guards making a
complete assembly that bolts through a hard point on the
upper part of the stone cover. The spark guard itself has an
elongated slot to allow positioning and adjustment as the
wheel diameter decreases. Their function is to contain,any
material (esp. sparks) that would be tracked around the
grindstone and sprayed out of the machine esp. over the
hands.
ON/OFF switch
A NVR double button switch panel, marked ‘I’ for On and
‘O’ for Off. The NVR function ensures the machine will
not be left in the ‘ON’ condition, in the event of a power
failure, and subsequent re-establishment of the supply.
Hold down holes
Four 8mm holes set in a matrix in the corner flanges of
the chassis to enable the grinder to be bolted down to the
bench or a stand.
Tool rest
Off
On
Grindstone
Hold down holes
Wheel guard
Grindstone
Eye shield/spark guard Work light