Axminster Craft 105247, Оригинальное руководство пользователя, Страница: 15 / 20

Dressing the Stone
15
Diamond
dressing block
Ultimate Edge Accessories
Ultimate Edge Micro Bevel Gauge code 105427 Axminster Honing Guide Assembly code 105281
The Ultimate Edge Honing Guide is perfect for plane blades,
joinery chisels etc, this fits onto the round bar. Clamping
the blade tightly, both primary and secondary bevels can
be achieved if required. The whole jig is manufactured from
stainless steel and has a simple setting screw to control
the width. The LH jaw is reversible and has twin jaws, one
curved so that chisels that do not have perfectly parallel
sides (such as Japanese and old hand forged chisels) can be
clamped, the other jaw being parallel. The jaws are dove-
tailed, so securely clamp the tools against the body. The
jaws accommodate blades from 3-66mm in width. A setting
gauge is provided to enable the correct sharpening angle
to be set based upon a standard projection of the cutting
tool at 25mm from the guide.
Having ground the primary bevel on any tool, the
secondary bevel or micro bevel actually does the majority
of the work. It is exactly what it says it is; a micro bevel
which can be increased with ease each time the tool
becomes dull. The micro bevel guide is made of stainless
steel and aluminium and has the ability to accept the tool
still mounted in the honing guide, the precise angle of the
micro bevel can be easily set and with a few positive passes
over a fine diamond or water stone, a superb edge can be
achieved.