AxleTech TA277, Руководство по обслуживанию

Страница: 5 / 62

Asbestos and Non-Asbestos Fibers Warning
iv
(5) The brake support plate, brake shoes and brake com-
ponents used to attach the brake shoes shall be thor-
oughly washed before removing the old shoes.
(6) In systems using fi lters, the fi lters, when full, shall be
fi rst wetted with a fi ne mist of water, then removed and
placed immediately in an impermeable container, labeled
according to paragraph (j)(4) of this section and disposed
of according to paragraph (k) of this section.
(7) Any spills of asbestos-containing aqueous solution or
any asbestos-containing waste material shall be cleaned
up immediately and disposed of according to paragraph
(k) of this section.
(8) The use of dry brushing during low pressure/wet clean-
ing operations is prohibited.
[C] Equivalent Methods
An equivalent method is one which has suffi cient written
detail so that it can be reproduced and has been demon-
strated that the exposures resulting from the equivalent
method are equal to or less than the exposures which
would result from the use of the method described in
paragraph [A] of CFR 1910.1001. For purposes of making
this comparison, the employer shall assume that expo-
sures resulting from the use of the method described in
paragraph [A] of this appendix shall not exceed 0.016 f/
cc, as measured by the OSHA reference method and as
averaged over at least 18 personal samples.
[D] Wet Method
(1) A spray bottle, hose nozzle, or other implement capa-
ble of delivering a fi ne mist of water or amended water or
other delivery system capable of delivering water at low
pressure, shall be used to fi rst thoroughly wet the brake
and clutch parts. Brake and clutch components shall then
be wiped clean with a cloth. Any wastewater generated
must be captured and properly disposed of without allow-
ing it to dry on any surfaces.
(2) The cloth shall be placed in an impermeable container,
labeled according to paragraph (j)(4) of the standard and
then properly disposed of as an asbestos waste, or the
cloth shall be laundered in a way to prevent the release of
asbestos fi bers in excess of 0.1 fi ber per cubic centimeter
of air.
(3) Any spills of solvent or any asbestos containing waste
material shall be cleaned up immediately according to
paragraph (k) of this section.
(4) The use of dry brushing during the wet method opera-
tions is prohibited.
[59 FR 40964, Aug. 10, 1994; 60 FR 33972, June 29,
1995; 77 FR 17778, March 26, 2012]
For more information, visit www.osha.gov, or call OSHA at
1-800-321-OSHA(6742), TTY 1-877-889-5627.
*References to OSHA, NIOSH, MSHA, and EPA, which
are regulatory agencies in the United States, are made to
provide further guidance to employers and workers em-
ployed within the United States. Employers and workers
employed outside of the United States should consult the
regulations that apply to them for further guidance.