MOUN T ING T HE SL IDER A ND C A MER A
Important! Make sure your tripod base is as
wide as the extended width of the Crane Slider.
1. Before you begin, check that the slider lock is in
the locked position.
2. Align and seat the 3/8”-16 tripod mount onto
your tripod. Rotate clockwise until secure.
3. Tighten the tripod locking knob by rotating it
clockwise.
4. Lock down the included ball head by tightening
its locking knob.
5. Align the 1/4”-20 ball-head adapter with either
of the two camera mounts. Rotate the ball-head
adapter clockwise until secure.
6. Align and seat your camera’s tripod mount onto
the ball-head adapter. Rotate your camera
clockwise until secure.
