•
Volume Levels:
The volume sliders may be changed either by left clicks above or below the
displayed level, or by dragging the level down using a left click and hold.
Note: If the preamplifier is in ‘Tracking’ mode then changing one volume changes
the other.
•
Maximum Volume Limit:
The maximum volume limit is set firstly by identifying the slider with a
left
mouse click, then on the keyboard hold down the ‘Shift’ key and adjust the level
using the ‘Up’ and ‘Down’ keys. The limit is indicated above the slider level by a
black bar as shown above in the Kitchen’s volume slider.
•
Preamplifier Tracking / Independent Mode:
The chain link button between the volume sliders is
used to toggle the preamplifier volume tracking mode. When the chain symbol is
unbroken the preamplifier volume tracks the amplifier volume. An offset between
the preamplifier and amplifier volume may be made by identifying the volume bar
to be changed with a left click, then make the change on the keyboard by holding
down the ‘Ctrl’ key and adjust the level using the ‘Up’ or ‘Down’ keys.
The zone 2
Main window above illustrates this and refers to the ‘Typical System Configuration’
on page 7. In this example zone 2’s preamplifier drives an active subwoofer. The
offset adjustment balances the Subs level in the listening environment.
When the chain link button is broken, the preamplifier is in ‘Independent’ mode.
While in independent mode the preamplifier volume may be adjusted independently
from the amplifier volume with one restriction: the maximum difference between
the preamplifier and amplifier volume levels is < 68.
•
All Off:
Left mouse clicks while over the ‘All OFF’ button turns OFF all
AX4752
zones.
•
Setup:
Opens the Setup Window giving access to the occasionally used functions.
•
Preset 1 – 6:
Momentary Presets. These are used for creating scenes and alarm clock events
•
Preset Setup:
Opens the Preset Setup Window where the alarm clock & presets are programmed.
22
