XF60-Q2901 Explosion-Protected Network Camera
About detectors
D:
Actual temperature increase in the zone
E:
Temperature in the zone
F:
Your temperature increase rate, expressed in degrees (°C or °F) per seconds
G:
Measurement point that triggers or untriggers an alarm
Note
By default, maximum temperature in the zone is used as the base for detection type
Increase
.
-
To edit emissivity settings in the zone: Select
Advanced Settings
and enter an emissivity value (0.50 – 1.00).
Different materials have different emissivity levels. See
Material Emissivity Table on page 31
.
5. For detection type
Above (A)
or
Below (B)
: Enter the
Detection Temperature
in the zone.
29
