AXIS V5938 PTZ Network Camera
Specifications
Network connector
RJ45 Ethernet connector.
Audio connector
3.5 mm connector
•
Audio in
– 3.5 mm input for a digital microphone, an analog mono microphone, or a line-in mono signal (left channel is
used from a stereo signal).
•
Audio in
– 3.5 mm input for a stereo microphone, or a line-in stereo signal.
•
Audio out
– 3.5 mm output for audio (line level) that can be connected to a public address (PA) system or an active speaker
with a built-in amplifier. A pair of headphones can also be attached. A stereo connector must be used for audio out.
Audio input
1 Tip
2 Ring
3 Sleeve
Unbalanced microphone (with or without electret
power) or line
Electret power if selected
Ground
Digital signal
Ring power if selected
Ground
Audio output
1 Tip
2 Ring
3 Sleeve
Stereo unbalanced line, “left”
Stereo unbalanced line, “right”
Ground
For audio in, the left channel is used from a stereo signal.
XLR connector
•
Left
– 3-pin XLR connector for balanced audio input. Use left connector for mono.
•
Right
– 3-pin XLR connector for balanced audio input.
Pin
1
2
3
Function
Ground
Balanced Microphone Hot (+) In
Balanced Microphone Cold (-) In
I/O connector
Use the I/O connector with external devices in combination with, for example, motion detection, event triggering, and alarm
notifications. In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the interface to:
23
