AXIS T99A10 Positioning Unit 24 V AC/DC
How to repaint the product
Pretreatment of parts
Depending on the part material and type of paint applied at factory, different pretreatments should be done for the new paint to
adhere as well as possible. For all variants though, proper cleaning to remove oil, grease and dust is strongly recommended.
For more information on the materials used in the product, see its datasheet at
www.axis.com
Powder coated parts -
Using fine sandpaper, remove the original powder coating down to the base material and clean the parts
before painting, or use a primer.
Anodised and chromated parts -
Use a primer.
Uncoated stainless steel -
No special pretreatment is needed, but make sure that the surface is clean before painting.
Plastic -
Use a primer.
Repainting
1. Apply a thin and even layer of spray paint according to the instructions of the paint manufacturer, and let the paint dry.
2. If you wish to get a better coverage and clearer color, apply a second layer of spray paint.
3. When the paint is dry, remove the masking.
4