AXIS T91A Series Installation Guide
Page 7
ENGL
IS
H
Install the AXIS T91A62 Parapet Mount
1. Refer to
on page 4 for information on the supplied
parts.
2. Route the network cable through or along the roof.
3. Attach the bracket holder in the desired position on the roof using
screws that are appropriate for the material and the weight of the
camera and bracket. Install the bracket maximum 80 mm
(3.2 in.)
from
the edge of the roof for the camera’s outer diameter to be aligned with
the edge of the roof. Maximum weight allowed 15 kg (33 lbs).
4. Route the necessary cables through the parapet bracket, securing them
in the cable holder.
Install bracket holder
Cable holder
Cable
from the edge of the roof
Bracket holder
Note
: Do not use bracket holder
as a temporary support
with the parapet bracket.
max. 80 mm (3.2 in.)
www.a1securitycameras.com email: [email protected]
