Axis T8126 High PoE 12V, Руководство по установке, Страница: 7 / 44

High PoE Midspan and Splitters Installation Guide Page 7
EN
GLIS
H
Mounting instructions
The AXIS T8121 may be wall or bench mounted using the rear side holes.
Note the following before mounting the AXIS T8121 to a fixed location:
• Do not cover the midspan or block the airflow to the product with any foreign object. Keep
the midspan away from excessive heat and humidity, and free from vibration and dust.
• Ensure that the cable length from the Ethernet network source to your Axis video product
does not exceed 100 meters (333 feet). The midspan is not a repeater and does not amplify
the Ethernet data signal.
• Use a splitter if desired; ensure that the splitter is connected close to your Axis video prod-
uct and not to the Midspan.
• There is no "on-off" switch; simply plug the AXIS T8121 into an AC power outlet.
To mount:
1. Install two screws vertically at a distance of 9.17 cm (3.61”) on the wall or shelf.
2. Align the AXIS T8121 mounting slots to capture
the surface screws.
A 5.8 to 7.0 mm (0.23" to 0.27")
B 2.0mm (0.08")
C 1.5mm to 2.5 mm (0.059" to
0.098")
D 3.0 mm (0.12")
A
B
C
D