Axis Spin |22| English
Axis Spin |23| English
To remove floating heads and
inner cutter assembly
To replace floating heads and inner
cutters, please refer to the “Ordering
Replacement Parts” section).
Skin irritation or a deterioration
of shaving performance typically
indicates that your cutting heads
need to be replaced. Replacement
intervals will vary with individual use
and different beard types.
1. Grasp the floating head assembly and gently lift it
off from the shaver. (figure 8)
2. Detach the inner cutter assembly (figure 9)
by pushing down and turning counter clockwise
the screw knob in the center (figure 9), then pull
upwards away from the outer cutter assembly.
3. Then, remove outer cutter assembly. (figure 10)
To replace floating heads and
inner cutter assembly
1. First, insert the new outer cutter assembly into
1 2
5
screw
knob
pin
3
4 locating
hole
