AXIS Camera Station S20 Appliance Series
Manage the built-in switch
DHCP server
Enabled
The status of the DHCP server.
When the DHCP server is disabled, you must assign IP addresses manually
to the cameras or use an external DHCP server accessible via the U1
network connection for IP assignment.
Start IP address
End IP address
When DHCP is enabled, you can choose a
Start IP address
and
End IP
address
range for assignment of attached devices
Subnet mask
The subnet mask of the U1 switch connection.
Gateway
The gateway to access the U1 switch connection.
DNS 1
The primary domain name server used by the switch.
DNS 2
An alternate domain name server used by the switch.
Lease length
The suggested length of time in minutes that the DHCP server will use for
potentially reassigning its pool of dynamic IP addresses. The minimum
lease length is 60 minutes.
Admin tab
In the
Admin
tab, you find information about the firmware version. In this tab you can also change the password, backup settings
and reboot the switch.
Pane
Function
Description
Security
Username
Password
New password
Confirm new password
These fields allow you to set the password for the switch administrator.
The switch only has one user:
admin
.
The factory default password is
system
.
Firmware
Version
The installed firmware version.
Upgrade firmware
Allows you to update the firmware to a new version.
Maintenance
Reset to factory default
Resets all switch settings to factory default values.
Reboot switch
Reboots the switch. While rebooting, all devices will temporarily lose
connection with the switch (including PoE).
Backup settings
Stores a backup of your settings in a file in the
Downloads
folder of
your browser.
Restore settings
Allows you to select a saved backup file to restore settings.
15