AXIS Q8752-E Bispectral PTZ Network Camera
Additional settings
4. Enter the name of the shared location on the host server.
5. Move the switch if the share requires a login, and enter username and password.
6. Click
Connect
.
Record and watch video
To record video you must first set up network storage, see
Set up network storage on page 12
, or have an SD card installed.
Record video
1. Go to the live view.
2. To start a recording, click
Record
. Click again to stop the recording.
Watch video
1. Click
Storage > Go to recordings
.
2. Select your recording in the list and it will play automatically.
Set up rules and alerts
You can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions.
The conditions can be used to trigger the actions. For example, the device can start a recording or send an email when it detects
motion, or show an overlay text when it records.
Trigger an action
1. Go to
Settings > System > Events
to set up a rule. The rule defines when the device will perform certain actions. Rules
can be setup as scheduled, recurring, or for example, triggered by motion detection.
2. Select the
Condition
that must be met to trigger the action. If you specify more than one condition for the rule, all of the
conditions must be met to trigger the action.
3. Select which
Action
the device should perform when the conditions are met.
Note
If you make changes to an active rule, then the rule needs to be restarted for the changes to take effect.
Detect motion with the thermal channel and zoom in and record with the visual channel
In difficult lighting conditions the thermal channel can detect objects that the visual sensor can’t. This example explains how to
use the thermal channel to detect motion, and then use the visual channel to zoom in and record. In the example, the camera
monitors a gate.
Create a motion detection profile:
Note
If you run AXIS Motion Guard on both channels simultaneously, it can affect the frame rate and the general performance.
Therefore, we recommend you to remove all AXIS Motion Guard profiles on the visual channel.
1. Go to
Settings > Apps
and open AXIS Video Motion Detection.
2. Select
Thermal
.
3. Create a profile named
Gate profile
that covers the area of interest. Find out more in the user manual for
AXIS Motion Guard at
axis.com/products/online-manual/
.
Create the preset positions:
13
